Heavy Equipment Lubricants for Construction
Pin and bushing greases, chisel paste and anti-seize for heavy equipment.
What Construction Equipment Is Up Against
Oscillating pins and bushings
Bucket and boom pins move back and forth under shock load, squeezing grease out of the contact zone.
Sand, dirt and water
Abrasive dirt and water get into every pivot, causing rapid wear and rust.
Hydraulic breakers
Breaker chisels and bushings see constant impact and heat, and ordinary grease slides right off.
Job-site environmental rules
Work near waterways and sensitive sites increasingly calls for biodegradable lubricants.
Construction equipment lives in dirt, water and constant impact. Excavators, loaders, dozers and breakers pivot on dozens of pins and bushings that carry heavy loads with every cycle. When the grease fails, pins wear, bushings crack and the machine goes to the shop instead of the job.
Why heavy equipment wears fast
Oscillating pins do not build a full oil film the way rotating bearings do, so grease gets squeezed out. Sand and water turn what remains into an abrasive slurry. Hydraulic breakers add impact and heat that most greases cannot handle.
What better lubricants do
Greases fortified with moly and graphite keep protecting after the oil is gone. Chisel pastes stay on breaker tools. Automatic lubrication systems grease while the machine works, and biodegradable products help on environmentally sensitive sites.
How Oilsan helps
We supply HUSKEY™ heavy equipment greases, chisel paste, open gear lubricants, anti-seize and penetrants to contractors, rental fleets and equipment dealers in Türkiye and around the world.
New Lubrication Technologies for Construction
Moly and graphite fortified greases
Solid lubricants keep protecting pins and bushings even after the base grease is squeezed out under load.
High-solids chisel pastes
Pastes with copper and graphite in a non-melting base stay on breaker tools and protect under impact.
Onboard automatic lubrication
Many new machines use automatic greasing systems, which need grease grades that pump well in cold weather.
Biodegradable greases and hydraulic fluids
Seed-oil and synthetic biodegradable products help contractors meet environmental requirements near water.
HUSKEY™ Products for Construction
Moly-Graph Grease
MOLY-GRAPH Grease is blended from the highest quality selected paraffinic petroleum oils, polymers and shear stable synthetic thickeners available. Treated with the latest chemical E.P. additives, rust and oxidation inhibitors to provide lasting protection against friction, wear and corrosion. Graphite and Molybdenum Disulfide (MOLY) lubricating solids of precise sub-micron and micron size have been completely homogenized into the product to further enhance load capacity, improve metal surfaces and reduce friction. Its Polymer base helps the grease to stay put and seal out dirt, water and other contaminants.
Industrial GreasesView product →Dyna-Mite Red Grease
DYNA-MITE RED GREASE is a unique high-temperature, extreme pressure, non-melting premium quality grease designed for very heavy-duty service in adverse environments. It is a blend of high quality petroleum oil and special synthetic polymers which work together to form an extremely water-resistant, tough lubricating film that prevents water washout and metal-to-metal contact even under extreme pressure or shock loading. HUSKEY DYNA-MITE RED GREASE is formulated with the optimum amounts of additives to provide maximum protection against rust, corrosion and oxidation. HUSKEY DYNA-MITE RED GREASE contains no fillers or clay thickeners. The distinctive red color makes it easy to identify during and after lubrication.
Industrial GreasesView product →Tuff Stuff Grease
TUFF STUFF is a new generation grease designed for today’s demanding industries. It represents the “state of the art” in grease technology, combining the finest base oil stocks, additives and synthetic thickeners available to provide a truly multi-service, friction reducing, non-melting grease with unmatched protection in normal and severe service applications. HUSKEY TUFF STUFF is a blend of the highest quality paraffinic base oils and polymers coupled with HUSKEY’S newest proprietary extreme pressure additive which forms a tough durable film of protection from friction, wear and corrosion over a wider temperature range (-20°F. to 540°F). HUSKEY TUFF STUFF’S unique formulation provides superior adhesion to metal surfaces that does not easily wash off, run out or separate even under adverse conditions of water, steam or dilute chemicals thus providing lower grease consumption and extended lubrication cycles.
Industrial GreasesView product →Chisel Paste
CHISEL PASTE is an extreme pressure, high temperature paste fortified with a balanced blend of Copper and Graphite in a heavy duty, high film strength base oil. It is designed to lubricate and give an “Armor-like” plating on the shaft, pins and bushings of hydraulic hammers and breakers. Due to its high solid content and non-melting synthetic thickener it will not slide down the shank of the tool during its operation.
Industrial GreasesView product →Open Gear Grease
OPEN GEAR GREASE is a heavy-duty, highly tenacious, semi-synthetic open gear lubricant containing a balanced blend of molybdenum disulfide (moly) and graphite, incorporated in a non-asphaltic, non-melt base grease that contains no clay fillers. Treated with the most modern additives to provide lasting protection against extreme pressure, wear, rust, and oxidation on gear faces and sliding surfaces operating in temperatures from -5°F to 425°F.
Industrial GreasesView product →341 Copper Anti-Seize Compound
341 COPPER ANTI-SEIZE is a heavy-duty, economical industrial anti-seize and lubricating paste containing a balanced blend of copper and graphite powder in a no-melt petroleum base grease. HUSKEY 341 leaves a protective film that protects metal parts and fasteners against extreme conditions of steam, chemicals, water and high temperatures to 2000°F.
Anti-Seize & Thread Sealants · Oilfield, Mining & DrillingView product →Eco-Lube EP 2
ECO-LUBE EP 2 is a blend of the finest quality USA grown natural seed oils available then treated with the most effective anti-oxidants, extreme pressure, anti-wear and anti-corrosion additives. PTFE is added to further enhance load capacity, and reduce friction. This unique blend, together with its synthetic shear stable thickening system, provides the maximum protection against friction, wear and corrosion. HUSKEY ECO-LUBE EP 2 GREASE is readily biodegradable and contains no ozone depleting chemicals, SARA Title 313 chemicals, heavy metals, greenhouse gases, chlorine, phenols, VOC’s or Prop. 65 Chemicals. HUSKEY ECO-LUBE EP 2 is also NSF/USDA H-1 *Registered and KOSHER approved, which gives it full acceptability for use in ALL areas where incidental food or potable water contact may occur. HUSKEY ECO-LUBE EP 2 is the ultimate “Green” Grease.
Food-Grade Lubricants · Industrial Greases · Biobased & GreenView product →Rust Release
RUST RELEASE is a unique blend of a specially formulated synthetic wax and the finest quality lubricating fluids available. Designed to produce the optimum properties of penetration, anti-corrosion, and anti-wear, HUSKEY RUST RELEASE penetrates deep into corroded or rusted areas breaking up corrosion and coating all surfaces to ease breakout of frozen parts. This coating protects all surfaces from further corrosion plus provides extremely long-lasting lubrication to bearings, slides and all metal surfaces.
Industrial Oils · Penetrants & Protectants · Oilfield, Mining & DrillingView product →Common Questions
What is the best grease for excavator pins and bushings?
A tacky, water resistant extreme pressure grease with moly or graphite, such as HUSKEY Moly-Graph or Dyna-Mite Red.
What should we put on hydraulic breaker chisels?
A high-solids chisel paste like HUSKEY Chisel Paste, which will not slide down the tool shank during operation.
Do you have a biodegradable grease for work near water?
Yes. HUSKEY Eco-Lube EP 2 is readily biodegradable and made with US-grown seed oils.
Other industries we serve
Right lubricant.
Less downtime.
Tell us about your application and we’ll recommend the right product.