Lubricants for the Rubber and Plastics Industry
Greases and oils for injection molding machines, extruders and calenders.
What Rubber & Plastics Equipment Is Up Against
Mold heat
Bearings and slides near molds and heaters run hot all the time.
Toggle and clamp systems
Toggle linkages on injection molding machines swing under high force every cycle; poor lubrication wears pins and bushings quickly.
Extruder gearboxes
Extruder drives run continuously at high torque and carry heavy thrust loads.
Clean parts
Oil drips or mist can mark part surfaces and lead to rejected product.
Rubber and plastics plants combine high temperature, high force and fast cycles in injection molding machines, extruders, calenders and curing presses. How reliably these machines run depends heavily on the right lubrication.
Challenges specific to the industry
Toggle systems swing under high force every cycle, and pins can wear quickly. Heat near the mold dries out greases. Extruder gearboxes run nonstop with high torque and thrust loads. Oil drips affect part quality directly.
Modern solutions
Solid-lubricant fortified greases protect oscillating pins. Anti-wear hydraulic oils protect precision valves. Synthetic gear oils run cooler and more efficiently in extruder gearboxes.
How Oilsan helps
We supply HUSKEY™ toggle greases, assembly paste, hydraulic and gear oils to plastic injection molding, extrusion and rubber processing plants in Türkiye and around the world.
New Lubrication Technologies for Rubber & Plastics
Solid-lubricant fortified toggle greases
Greases with moly and PTFE keep protecting oscillating toggle pins even when the oil film gets thin.
Anti-wear hydraulic oils
Hydraulic oils protected against rust, oxidation and foaming extend the life of servo and proportional valves.
Synthetic gear oils
Full synthetic gear oils run cooler in extruder gearboxes and reduce micropitting.
HUSKEY™ Products for Rubber & Plastics
Moly Assembly Lubricant
MOLY ASSEMBLY LUBRICANT is a heavy duty, multi-purpose extreme pressure lubricant and anti-seize compound designed to reduce seizing, galling, fretting and wear. A balanced blend of lubricating solids, including molybdenum disulfide, are dispersed in the product to assure superior performance during its full working life. HUSKEY MOLY ASSEMBLY LUBRICANT contains proprietary technology to prevent fretting wear. Rust and oxidation inhibiting characteristics have been maximized to afford complete rust protection and life of the lubricant.
Anti-Seize & Thread SealantsView product →TF-1000 Multi-Purpose PTFE Grease
TF-1000 GREASE is a versatile, multi-purpose grease containing powdered PTFE. It is blended from the highest quality selected oils and synthetic bases available. It is compounded by special processes and techniques to guarantee thorough dispersion and homogenization of the PTFE lubricating solids. A highly water resistant high temperature adhesive lubricant with the unique characteristics of PTFE. Rust and oxidation inhibiting characteristics are maximized to afford complete rust protection and long life of the lubricant.
Industrial GreasesView product →HTS-2 Moly Grease
HTS-2 MOLY GREASE is a premium quality synthetic high temperature grease fortified with molybdenum disulfide (Moly). Blended completely from pure synthetic base oils and thickeners to provide extended service life and wide temperature ranges. Coupled with the most modern extreme pressure and anti-wear additives it proves an exceptional lubricant for use in industry today. HUSKEY HTS-2 OPERATING RANGE: Base Grease -35°F to 500°F with dry film lubrication to 850°F.
Industrial GreasesView product →MP-2 Polyurea Grease
MP-2 Polyurea Grease is a second generation polyurea grease. This unique new, high performance, multi-purpose grease is based on advanced polyurea technology. It is formulated from pure petroleum base oils then fortified with extreme pressure additives and rust and oxidation inhibitors. HUSKEY MP-2 Polyurea Grease gives longer bearing life under high speed, high temperature and high water applications than most other widely used antifriction bearing greases. The distinctive Green color makes it easy to identify during and after lubrication.
Industrial GreasesView product →HLO Series Oils
HLO SERIES OILS are heavy duty, multi-functional, anti-wear oils designed to meet the demanding needs of a wide variety of modern industrial equipment. They have been formulated from the highest quality refined paraffinic base stocks and latest additives to provide excellent friction reducing properties coupled with rust, oxidation and foaming protection, thus ensuring longer service life in a wide variety of applications. HUSKEY HLO SERIES OILS are non-detergent oils formulated with special additives to condition seals and reduce leaking. It is also a non-detergent product.
Industrial OilsView product →LPC Series Gear Oils
LPC GEAR OILS are high-performance, fully synthetic, all-purpose gear oils formulated with HUSKEY’S new proprietary SEM (Surface Eutectic Modification) additive. The revolutionary new SEM technology makes it a Lower Power Consumption (LPC) gear oil, hence the name LPC Gear Oil. They offer maximum wear protection under extreme operating conditions such as vibrations, scuffing, oscillating motions, and shock loads, where metal asperity contact occurs. Because of the thermally and mechanically stable polyalphaolefin (PAO) base oils and SEM technology, HUSKEY LPC GEAR OILS give extra protection to micro-pitting due to asperity contact. In addition, compared to both conventional mineral and synthetic gear oils the HUSKEY LPC GEAR OILS have proven they can lower the operating temperatures of the gearbox resulting in lower power costs. Due to their high viscosity index, they provide effortless startup even during cold temperatures; yet give extra wear protection in high-temperature applications. The added antifoam protection gives extra protection to high-speed gearboxes. In addition, the demulsification properties of HUSKEY LPC GEAR OILS provide very fast separation from water contamination. They meet or exceed all *major gear oil specifications, original equipment manufacturer requirements, and wind turbine manufacturers.
Industrial OilsView product →650 H.T. Oil
650 HT OIL is a blend of the finest quality pure synthetic base oil and additives available and is formulated with Molybdenum Disulfide (Moly). Superior performance capabilities are derived from special properties of the synthetic base oil coupled with extreme pressure and anti-wear additives. HUSKEY 650 HT OIL is truly a multi-service lubricant for extended service under extremely high and low temperature conditions from -35°F to 500°F with dry film lubrication to 850°F.
Industrial OilsView product →Common Questions
Which grease should we use on injection molding toggles?
A solid-lubricant fortified grease for pins oscillating under high load, such as HUSKEY TF-1000 with PTFE or HTS-2 Moly Grease. Check the machine builder’s recommendation as well.
Which oil do you recommend for hydraulic systems?
HUSKEY HLO Series, with anti-wear, anti-foam and oxidation protection. Choose the viscosity grade to match the machine builder’s recommendation.
How can we stop galling during mold assembly?
HUSKEY Moly Assembly Lubricant prevents galling and fretting on ejector pins, guide bushings and mounting faces.
Other industries we serve
Right lubricant.
Less downtime.
Tell us about your application and we’ll recommend the right product.