Stenter Chain Oils and Lubricants for the Textile Industry
Non-staining, high-temperature lubricants for stenters, weaving and spinning mills.
What Textiles Equipment Is Up Against
Stenter oven heat
Stenter chains and rails run hot around the clock; standard oils carbonize and stiffen the chain.
Stains on fabric
Dripping or spattered oil stains fabric, which means seconds and waste.
High speeds
Bearings in spinning and weaving machines run at very high speeds.
Lint and fiber dust
Airborne fiber sticks to lubricant and forms an abrasive build-up.
Textiles, one of Türkiye’s oldest industries, demand high temperature, high speed and flawless fabric quality at the same time, from finishing to weaving. Lubricant choice affects both machine life and how much fabric leaves the mill as first quality.
Why textiles are hard on lubricants
Stenter chains run at oven temperature and turn standard oils into carbon. Dripping oil stains fabric. Spinning and weaving bearings turn at very high speed while airborne fiber sticks to the lubricant.
Modern solutions
Moly-fortified synthetic stenter chain oils stay clean at high temperature. Non-staining synthetic oils reduce seconds. Greases designed for high speed extend bearing life.
How Oilsan helps
We supply HUSKEY™ stenter chain oils, non-staining synthetic oils, high-speed greases and gear oils to dyehouses, finishing, weaving and spinning mills in Türkiye and around the world.
New Lubrication Technologies for Textiles
Low-residue synthetic stenter chain oils
Moly-fortified synthetic and ester-based oils leave far less carbon at high temperature and keep chains flexible.
Non-staining synthetic oils
Non-staining synthetic oils cut seconds at points where oil could reach the fabric.
High-speed bearing greases
Greases designed for low temperature and high speed give long bearing life in spinning and weaving machines.
HUSKEY™ Products for Textiles
650 H.T. Oil
650 HT OIL is a blend of the finest quality pure synthetic base oil and additives available and is formulated with Molybdenum Disulfide (Moly). Superior performance capabilities are derived from special properties of the synthetic base oil coupled with extreme pressure and anti-wear additives. HUSKEY 650 HT OIL is truly a multi-service lubricant for extended service under extremely high and low temperature conditions from -35°F to 500°F with dry film lubrication to 850°F.
Industrial OilsView product →SGL-800 Series Oils
SGL-800 SERIES OILS are heavy duty extreme pressure oils formulated from the highest quality selected synthetic base oils and additives available. HUSKEY SGL-800 SERIES OILS have been compounded to be more reliable, even under the toughest conditions. These high quality 100% synthetic oils have been designed to give extra protection in high and low temperature applications. HUSKEY SGL-800 SERIES OILS are NSF H-2 Registered for use in food processing plants.
Industrial OilsView product →OCL-G Series Oven Chain Oils
OCL-G Series Oven Chain Oils are formulated from selected blend of high viscosity index synthetic esters and premium additives coupled with HUSKEY’S newest proprietary extreme pressure additive which forms a tough durable film of protection from friction, wear and corrosion over a wide temperature range. This synergistic blend produces self-cleaning properties, friction reduction, anti-wear, copper corrosion protection, low oil and power consumption, no throw-off at high speeds and minimum build-up of deposits.
Industrial OilsView product →HI-LO Series Oils
HI-LO SERIES OILS are a blend of the finest quality, pure synthetic oils available and treated with the most effective extreme pressure, corrosion inhibitors, anti-oxidant, anti-foam and anti-wear additives. This unique combination provides maximum equipment protection in extremely high and low temperature applications. HUSKEY HI-LO SERIES OILS are NSF/USDA H-1 *Registered and KOSHER approved which gives them full acceptability for use in all areas where incidental food contact may occur.
Food-Grade Lubricants · Industrial Oils · Biobased & GreenView product →Coolube 65 Grease
COOLUBE 65 is a high performance, low temperature grease designed for high speeds and moderate loads. HUSKEY COOLUBE 65 is blended from the highest quality petroleum base stocks and selectively treated with rust, oxidation and anti-wear additives coupled with an extremely shear stable thickener system.
Industrial GreasesView product →HTL-500 Grease
HTL-500 GREASE represents some of the most advanced lubricant technology. It is a versatile, premium quality, synthetic grease fortified with PTFE. Blended completely with pure synthetic base oils, additives and shear stable thickeners to provide maximum equipment protection in extremely high and low temperatures (Operating Range -75° to over 500°F). HUSKEY HTL-500 GREASE is also NSF/USDA H-1 *Registered and KOSHER approved, which gives it full acceptability for use in all areas where incidental food contact may occur.
Food-Grade Lubricants · Industrial GreasesView product →SMP Grease
SMP GREASE is a unique high-temperature, extreme pressure, non-melting, non-caking grease designed for extreme service applications. Blended from pure synthetic base oils and thickeners then coupled with the most modern extreme pressure and anti-wear additives to provide a tough, durable lubricating film that protects against metal to metal contact. HUSKEY SMP GREASE is designed to withstand temperatures from -30°F (-34°C) to 530°F (277°C) with intermittent usage to 600°F (318°C).
Industrial GreasesView product →LPC Series Gear Oils
LPC GEAR OILS are high-performance, fully synthetic, all-purpose gear oils formulated with HUSKEY’S new proprietary SEM (Surface Eutectic Modification) additive. The revolutionary new SEM technology makes it a Lower Power Consumption (LPC) gear oil, hence the name LPC Gear Oil. They offer maximum wear protection under extreme operating conditions such as vibrations, scuffing, oscillating motions, and shock loads, where metal asperity contact occurs. Because of the thermally and mechanically stable polyalphaolefin (PAO) base oils and SEM technology, HUSKEY LPC GEAR OILS give extra protection to micro-pitting due to asperity contact. In addition, compared to both conventional mineral and synthetic gear oils the HUSKEY LPC GEAR OILS have proven they can lower the operating temperatures of the gearbox resulting in lower power costs. Due to their high viscosity index, they provide effortless startup even during cold temperatures; yet give extra wear protection in high-temperature applications. The added antifoam protection gives extra protection to high-speed gearboxes. In addition, the demulsification properties of HUSKEY LPC GEAR OILS provide very fast separation from water contamination. They meet or exceed all *major gear oil specifications, original equipment manufacturer requirements, and wind turbine manufacturers.
Industrial OilsView product →Common Questions
What is the best oil for stenter chains?
A synthetic chain oil that leaves little residue at high temperature, such as HUSKEY 650 H.T. Oil or SGL-800 Series, both designed for tenter frame chains.
How can we reduce the risk of stained fabric?
Use non-staining synthetic oils such as HUSKEY HI-LO Series, or the semi-transparent HTL-500 grease, near the fabric and keep dosing under control.
Which grease suits high-speed spinning machine bearings?
HUSKEY Coolube 65 Grease, designed for high speed and moderate load, is recommended for all bearing surfaces in the textile industry, including fan bearings.
Other industries we serve
Right lubricant.
Less downtime.
Tell us about your application and we’ll recommend the right product.