Industrial Lubricants for Manufacturing Plants
Greases and oils for presses, conveyors, gearboxes and compressors.
What Manufacturing Equipment Is Up Against
Too many lubricants
Plants often stock dozens of greases and oils, which raises cost and the risk of putting the wrong product in the wrong machine.
Unplanned downtime
A single failed gearbox or conveyor bearing can stop an entire line. Lubrication is behind a large share of those failures.
Mixed speeds and loads
High-speed electric motor bearings, heavily loaded press slides and slow conveyors all need different film strength.
Energy costs
Gearboxes and compressors run around the clock, so small efficiency losses add up to large power bills.
Manufacturing plants run on moving parts: motors, conveyors, gearboxes, presses, compressors and machine tools. Each one depends on the right lubricant in the right amount at the right time. When that slips, the result is unplanned downtime, scrapped parts and overtime repairs.
The hidden cost of “good enough” lubrication
Many plants accumulate lubricants over years, with a different product for every machine and every maintenance supervisor. That leads to higher inventory, confusing routes and a real risk of mixing incompatible greases. Consolidating to fewer, better products is one of the fastest reliability wins available.
What better lubricants deliver
Modern polyurea and complex greases outlast older lithium greases at high speed and temperature. Fully synthetic gear oils run cooler and use less energy. Combined with condition monitoring, they let plants extend intervals safely and spend maintenance hours where they matter.
How Oilsan helps
We supply HUSKEY™ multi-purpose greases, synthetic gear oils, compressor and hydraulic oils, chain oils and cutting fluids to manufacturers in Türkiye and around the world. Send us your equipment list and we will recommend a consolidated lubricant program and ship it fast.
New Lubrication Technologies for Manufacturing
Polyurea and complex greases
Modern thickener systems give longer bearing life at high speed and temperature, and resist water better than older lithium greases.
Low-power-consumption gear oils
Fully synthetic gear oils with advanced surface additives reduce friction and operating temperature, cutting energy use and micro-pitting.
Condition monitoring
Inline oil sensors and routine oil analysis let plants change oil and grease on condition rather than on the calendar.
Lubricant consolidation
Wide-range multi-purpose products let plants cut their lubricant list, simplify training and reduce misapplication.
HUSKEY™ Products for Manufacturing
Tuff Stuff Grease
TUFF STUFF is a new generation grease designed for today’s demanding industries. It represents the “state of the art” in grease technology, combining the finest base oil stocks, additives and synthetic thickeners available to provide a truly multi-service, friction reducing, non-melting grease with unmatched protection in normal and severe service applications. HUSKEY TUFF STUFF is a blend of the highest quality paraffinic base oils and polymers coupled with HUSKEY’S newest proprietary extreme pressure additive which forms a tough durable film of protection from friction, wear and corrosion over a wider temperature range (-20°F. to 540°F). HUSKEY TUFF STUFF’S unique formulation provides superior adhesion to metal surfaces that does not easily wash off, run out or separate even under adverse conditions of water, steam or dilute chemicals thus providing lower grease consumption and extended lubrication cycles.
Industrial GreasesView product →MP-2 Polyurea Grease
MP-2 Polyurea Grease is a second generation polyurea grease. This unique new, high performance, multi-purpose grease is based on advanced polyurea technology. It is formulated from pure petroleum base oils then fortified with extreme pressure additives and rust and oxidation inhibitors. HUSKEY MP-2 Polyurea Grease gives longer bearing life under high speed, high temperature and high water applications than most other widely used antifriction bearing greases. The distinctive Green color makes it easy to identify during and after lubrication.
Industrial GreasesView product →Molyplex Grease
MOLYPLEX GREASE is a premium quality, multi-purpose grease containing a blend of molybdenum disulfide (Moly) and special lubricating solids. This unique combination of solid lubricants offers superior performance compared with pure molybdenum disulfide greases. This optimum percentage of lubricating solids is homogenized into a blend of the finest quality base oils and thickeners available. Treated with the most modern additives to provide lasting protection against water, extreme pressure, temperature, fretting and oscillating conditions.
Industrial GreasesView product →LPC Series Gear Oils
LPC GEAR OILS are high-performance, fully synthetic, all-purpose gear oils formulated with HUSKEY’S new proprietary SEM (Surface Eutectic Modification) additive. The revolutionary new SEM technology makes it a Lower Power Consumption (LPC) gear oil, hence the name LPC Gear Oil. They offer maximum wear protection under extreme operating conditions such as vibrations, scuffing, oscillating motions, and shock loads, where metal asperity contact occurs. Because of the thermally and mechanically stable polyalphaolefin (PAO) base oils and SEM technology, HUSKEY LPC GEAR OILS give extra protection to micro-pitting due to asperity contact. In addition, compared to both conventional mineral and synthetic gear oils the HUSKEY LPC GEAR OILS have proven they can lower the operating temperatures of the gearbox resulting in lower power costs. Due to their high viscosity index, they provide effortless startup even during cold temperatures; yet give extra wear protection in high-temperature applications. The added antifoam protection gives extra protection to high-speed gearboxes. In addition, the demulsification properties of HUSKEY LPC GEAR OILS provide very fast separation from water contamination. They meet or exceed all *major gear oil specifications, original equipment manufacturer requirements, and wind turbine manufacturers.
Industrial OilsView product →Enclosed Gear Oils
GEAR OILS are all-purpose, extreme pressure gear oils formulated from the highest quality selected base oils and additives available. HUSKEY GEAR OILS have been compounded to be more reliable, even under the toughest conditions. These high-quality oils have been formulated to give extra protection in high-temperature applications. Special polymer additives track on all gear teeth, coating the metal surfaces to reduce backlash and quiet worn or noisy gears. HUSKEY GEAR OILS meet or exceed most *major specifications and perform to almost all equipment requirements.
Industrial OilsView product →N-500 Series Oils
N-500 SERIES OILS are a blend of highest quality selected paraffinic base oils coupled with the finest rust and oxidation resistant additives available. This unique combination produces an exceptional lubricating oil with excellent thermal stability and low carbon forming characteristics. Formulated with only high-viscosity index oils to minimize viscosity changes during high and low temperature variations. These oils have extremely high film strength, to keep working metal parts separated, thus reducing friction and wear. Compounded to meet service requirements of Denison HF-2 and Cincinnati Milicrons high temperature heat stability test.
Industrial OilsView product →HLO Series Oils
HLO SERIES OILS are heavy duty, multi-functional, anti-wear oils designed to meet the demanding needs of a wide variety of modern industrial equipment. They have been formulated from the highest quality refined paraffinic base stocks and latest additives to provide excellent friction reducing properties coupled with rust, oxidation and foaming protection, thus ensuring longer service life in a wide variety of applications. HUSKEY HLO SERIES OILS are non-detergent oils formulated with special additives to condition seals and reduce leaking. It is also a non-detergent product.
Industrial OilsView product →Soluble Cutting Oil
SOLUBLE CUTTING OIL is a versatile, compounded, water-soluble cutting oil designed primarily as a lubricant and coolant for cutting and grinding operations on both ferrous and non-ferrous metals. HUSKEY SOLUBLE CUTTING OIL has proven outstanding as a coolant for heavy-duty machining operations, as an emulsifiable hydraulic oil and as a rust preventative.
Industrial OilsView product →Common Questions
How can we reduce the number of lubricants in our plant?
Start with a survey of every lubrication point. Many plants can cover most bearings with one or two multi-purpose greases such as HUSKEY Tuff Stuff or MP-2 Polyurea and standardize gear oils by viscosity grade. We can help you build the list.
Are synthetic gear oils worth the higher price?
In continuously running, heavily loaded or hot gearboxes, usually yes. Longer drain intervals, lower operating temperature and reduced energy use often outweigh the price difference.
Which oil should we use in our air compressor?
Many reciprocating, rotary and centrifugal compressors that call for a non-detergent oil can use HUSKEY N-500 Series. Always confirm the grade against the compressor maker's recommendation.
Other industries we serve
Right lubricant.
Less downtime.
Tell us about your application and we’ll recommend the right product.